The wall mounted touch all-in-one machine is a combination of computer control board and electronic circuit. For such wall mounted structure and types of electronic products, we need to have some knowledge to better maintain the touch all-in-one machine and extend its service life. Because it is an all-in-one machine in the wall mounted outdoor environment, more attention should be paid to the maintenance. Hefei touch all-in-one machine
![Maintenance of wall mounted touch all-in-one machine - it is enough to solve these four aspects Maintenance of wall mounted touch all-in-one machine - it is enough to solve these four aspects](/uFile/94146/image/2019515101136534.jpg)
1. Daily cleaning: users need to spray alcohol or glass cleaner on soft towels to wipe the touch screen. At the same time, the cleaning effect is poor and the circuit is wet due to the wrong use of the cleaner. Therefore, never wipe with water.
2. Use environment: The internal parts of the wall mounted all-in-one machine are sensitive to air humidity. Once the internal parts are wet, the machine will be short circuited. The machine should be placed at a location with relatively appropriate ambient air humidity.
3. Technical knowledge: The service life of the touch all-in-one machine is limited. The wrong sequence of frequent power on/off, power on or power off of the machine will cause certain damage to electronic components. Even when there are a large number of temporary files on the hard disk, direct power off will lead to errors in the hard disk, and will also affect its life.
4. Use of the machine: because the touch screen of the all-in-one machine will often appear electrostatic phenomenon, making the dust in the air adsorbed on the reflective stripes around the touch screen, the touch function of the machine will gradually disappear, so users need to clean it frequently.